Hello, Bill--
Suggest you go to www.mouser.com and in the search box enter 25LM022
Mouser is an excellent company and seems to appreciate all orders, not just
large ones.
73, Mike -N4NT-
----- Original Message -----
From: "w a lindsay-smith" <g3wni@btinternet.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, August 06, 2005 4:43 AM
Subject: Re: [TenTec] Mikes for old tentecs
Steve,
I have a Shure 401A hand mic now defunked and been looking for a mic for my
new TT Argonaut V. Your suggestion seems just the answer to my problem. I
sent the mic to Shure for repair but no joy, it is out of production and no
spares.
Could you please send me details of Mouser, whom I know nothing about,so
that I can make contact to buy the part you recommend. I will use the Shure
401A case to hold the insert.
I use a rather old Shure 444 on my Omni V1 and also on my previous Drake C
line. As this is getting on I'm looking for a back-up.
Kind regards and 73 Bill. G3WNI
g3wni@btinternet.com
----- Original Message -----
From: "Steve Ireland" <vk6vz@arach.net.au>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, August 06, 2005 1:23 AM
Subject: Re: [TenTec] Mikes for old tentecs
> G'day
>
> For anyone who is looking for a REALLY cheap and excellent quality high Z
> microphone for a older Ten Tec transceiver, Mouser sell a Kobitone crystal
> cartridge for about $7 (part number 25LM022). Simply buy a dead
> microphone
> casing that you like at a Hamfest and drop one in.
>
> I use one on my Drake T4XC and it sounds as good as an old Shure 201
> microphone that I have.
>
> Vy 73
>
> Steve, VK6VZ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|