Would anyone suggest that using a power strip as the
on/off switch for your Corsair II (always on) supplied
by an RS35 (switch on)is a bad thing?
I have an airpax that I normally use as the on/off
switch after the RS35A is already powered up at the
main station position, but not at the secondary
position.
I am wondering if allowing the gear to shut down
slowly as the RS35 filter caps drain is harder on the
gear at the secondary station than the primary. Astron
is also not stabilized at rig power up that way.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|