TenTec
[Top] [All Lists]

Re: [TenTec] Orion II

To: tentec@contesting.com
Subject: Re: [TenTec] Orion II
From: "Richard Detweiler" <rdetweil@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 20 Jul 2005 16:38:07 -0500
List-post: <mailto:tentec@contesting.com>

In these two areas, Orion performs inadequately. I have been led to believe
these issues will be fixed AND specifically, fixed for those of us who have
already invested in Orion.  Today's announcements suggest otherwise.  If my
reading of the situation is correct, then I have every right to be feeling
cheated.


Understandably,

However it seems that replacing 7 boards and display becomes essentially replacing the whole radio.

The filtering problem in Orion I is effectivly fixed with the Inrad 762 filter in the 1Khz slot. This for me is the only real hardware issue so far, and even at that, I wouldn't declare it major.

Having some idea of V2 through discussions with Gary at Dayton, It will address the issues you've addressed here about processor speed and sweep display. A discussion on the internal design of V1 vs V2 convinced me that V2 will be faster by eliminating significant wait states on each processor. Perhaps significantly faster. Howerver not as fast as the new Orion II for the obvious reason of the faster cpu. Ultimatly if it is fast enough then it doesn't need to be faster than fast enough.

I had been planning on a second Orion. I've decided to go ahead with the Orion II and will be able to compare it to the Orion I on V2 in my own shack. I'm hopeing for the results as stated by others that the basic RX will be virtually the same. I'm also hopeing the filtering performance of the Orion II for the narrow filters will be better. Orion I is still a great Contesting Rig and DX hunter. Orion II sounds like it will be a better DX hunter and prettier to look at.

Best wishes,
Rich
K5SF



<Prev in Thread] Current Thread [Next in Thread>