Bob:
I agree. The radio is usually at fault. After all, radios do produce the RF
and it should be able to survive in it's own RF field. This goes to
peripherals such as keyers too. I've had some early PIC based MFJ keyers go
totally crazy when exposed to a little RF. My newer MFJ-495 seems to be
immune. No, you can't completely blame the environment. A radio should not
act up even if the antenna is only 10ft away or directly overhead. Certainly
some rigs are more susceptible. My IC-706 mobile hates 17 meters. The cable
between the rig and face plate seems to be at fault.
Rather than blaming RFI on aluminum, I think the blame goes to the lack of
bypassing on IC leads and external jacks. Comparing the schematic between
various models and brands of rigs reveals which manufactures have taken the
greatest care to provide RF bypassing.
Steve Ellington
N4LQ@insightbb.com
----- Original Message -----
From: "Carter Grabarczyk" <k8vt@ameritech.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Sunday, June 26, 2005 6:03 PM
Subject: Re: [TenTec] RFI question for Orion and other TT rigs
> Robert & Linda McGraw K4TAX wrote:
>
>>In conclusion, if you have RFI issues, it's not the radio's fault.
>>
>>73
>>Bob, K4TAX
>>
>>
>>
> Bob,
>
> I respectfully disagree with your statement above. It seems to be waaay
> too much of a generalization. I have had several 100 watt radios in the
> same physical location with the same antenna (i.e., the *only* variable
> was the radio) and some radios experienced RFI and some did not.
> Unfortunately, some radios have more ferrite beads or bypass capacitors
> than others, others may have a "floating" audio ground (the dreaded "pin
> 1" syndrome), etc, etc. I don't think you can say "it's not the radio's
> fault" in every case.
>
> 73,
> Carter K8VT
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|