TenTec
[Top] [All Lists]

Re: [TenTec] Omni V.9 DB25 to DB9

To: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>,"Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Omni V.9 DB25 to DB9
From: "denton" <denton@oregontrail.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 21 May 2005 23:48:53 -0700
List-post: <mailto:tentec@contesting.com>
My Omni VI plus opt. 3 communicates fine with DB25 to DB25 standard 
cabeling...but I have to use another serial port to activate the cw and ptt 
ports in the rig...
Anyone have a work around to get the DB25 port to do this, thus freeing up 
the second serial port in the pc? Is this program specific? I am running 
MixW recent vintage.
----- Original Message ----- 
From: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Friday, May 20, 2005 6:11 PM
Subject: Re: [TenTec] Omni V.9 DB25 to DB9


> Check it out:http://www.zytrax.com/tech/layer_1/cables/tech_rs232.htm
> ----- Original Message ----- 
> From: "Andy Bullington" <abullington@comcast.net>
> To: <tentec@contesting.com>
> Sent: Saturday, May 21, 2005 00:15
> Subject: [TenTec] Omni V.9 DB25 to DB9
>
>
>> Thanks to all who have answered. I HAVE the manual. The wiring diagram is
>> for DB25 to DB25 for PCs.
>> The diagram for DB25 to DB9 is for Macs. Will it work for PCs too? All 
>> I'm
>> trying to do is wire up a simple 3 or 4 wire
>> DB9 to DB9 for my Omni V with the N4PY chip. You absolutely CANNOT use 
>> any
>> standard cables for computer connection.
>> you have to make one up. I used to have the  proper diagram but I've lost
>> it. I don't HAVE a spare DB25 connection on
>> my newer PC , otherwise I would just use the diagram in the manual. I
> could
>> wire up DB25 to DB25 and use an adapter I guess, but I'd rather just do 
>> it
>> right in the first place.  I was hoping someone simply knew the pin
>> assignments on the DB9 side. Thanks.
>>                                   Andy W1AWB
>> >>you can also use a DB25 to DB9 adapter for that if you have one handy. 
>> >>i
>> have used such an adapter many times. jack ak7o
>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>