Ten*Tec sells the owners manual which is also the service manual.
Could be that nothing is really wrong with the radio because of something as
simple as the ALC knob not being turned fully clockwise.
It's happened to people who are even more familiar with the rig... trust me.
73! =paul= W8KC
Collector of Ten*Tecs and other fine plastics.
Visit the Virtual Ten*Tec Museum at http://mywebpages.comcast.net/w8kc
Listen to 7.040 MHz from anywhere with Media Player v9
http://www.w8kc.com/stream.asx
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Robert & Linda McGraw K4TAX
Sent: Thursday, May 19, 2005 9:03 PM
To: tentec@contesting.com
Subject: [TenTec] Omni D Schematic/Manual
Acquired a Omni D that has a low power output (35 - 45 watts) problem on all
bands into 50 ohm load. I need a schematic or manual and suggestions.
Power supply is running 13.5 V at the radio under load. Draws about 8 amps
under tune (LOCK) condition.
Thanks in advance
73
Bob, K4TAX
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|