I just put a jumper wire from the base of the transistor that drives the
relay to ground. Some people pop the cover off the relay and jam the
armature down with a piece of cardboard.
73,
Bob WB2VUF
We5f@aol.com wrote:
> Hello:
>
> I'm sure this question has been asked/answered before, but I'm new to this
> list and could use some help. I have a Paragon 1 with the Giehl chip,
> version
> 3.0.
>
> Is there a simple way to defeat the auxiliary T/R switching relay RLY 1 on my
> Paragon? I will never need to switch an external amplifier, and the clicking
> is annoying when operating CW QSK. Could I clip the ground lead on the pot
> to defeat the relay? If I can't defeat it, is there a way to increase the
> delay? It's controlled by R33, a 100kOhm pot on the control board. Would
> going
> to a 10 kOhm pot increase the delay to at least 3 seconds?
>
> Thanks for the help! 73, Jim K5HO
> --------------
>
> Nunquam secundum.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|