[TenTec] Omni VI, opt3 problem

[<wlbaber@bellsouth.net>]

Thanks Dave...Omni is on its way back.  I traced the problem to connector 86 on 
the control board.  The 20 meter position is not turning on (all other 
positions are turning on), and I think the transmit problem is probably K1 on 
the bandpass filter board not closing, probably a diode problem or the relay 
when out.

...nothing serious, should have it back shortly.

73, Will, wj9b, dit dit
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec