[TenTec] RE: PSK Help

[designer <designer@quickdata.com>]

Dick,
I occasionally have that problem with the Argo V - but I don't think 
it is directly a "rig"/Hardware problem. There is some timing issue 
with the software and actuating the PTT or communicating with the Com 
Port. In my case, sometimes opening and closing the configuration 
window that specifies the Com Port works. What always works is 
launching WinPSK and pushing TX to check the ALC level. After that, I 
quit and relaunch the other software and it is fine.

In my case, when the problem appears, as in your case, the RX is just 
fine, and when I try to transmit, the script of text appears in the 
"send" window as if it is being sent. But there is no telltale glow 
from the Antenna tuner indicator. If that's what you are 
experiencing, try the above actions.
Gd Lck,
73,
Paul
PS: I am using a RASCAL hardware interface.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec