Re: [TenTec] Orion AUX out audio question

["Tommy" <aldermant@alltel.net>]

Page 28 of the manual states " Pin 4 is left side audio output. This 
output is line level...." insinuating the audio is a fixed level, 
however it is not. If you have the audio menu LEFT set to either 
MAIN or BOTH, the audio is line level (fixed)...however if you have 
LEFT set for SUB, you can vary the audio level at pin 4 using the 
SubRx AF control.

You can easily observe the AUX I/O output levels using something 
like Spectragram. Presently I do not use the right audio at pin 6, 
so can not quickly verify how that works.

Orion specifications, page 51 says the line level output is 0 dBm 
into 600 ohms.

Tom - W4BQF

----- Original Message ----- 
From: "Robert Carroll" <rlcarroll@patmedia.net>
To: <tentec@contesting.com>
Sent: Saturday, January 22, 2005 6:05 PM
Subject: [TenTec] Orion AUX out audio question


> The Orion supplies left and right audio out through the aux DIN 
> connector on
> the back.  They are "line level."  Is the signal out independent 
> of the
> setting of the volume control?
>
>
>
> Bob W2WG
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec