Hi Martin,
(sorry for English mistakes) hi!
As "Power absorption" I mean the current the ORION requires for
transmission.
It is abt 23amps at 13.8 Vdc for 100W output power.
It is abt 14amps at 13.8 Vdc for 50W output power.
I'm sorry but the videos didn't start. I have Quick time software on this
computer.
In any case this is a very good idea. I'll prepare a video.
In next message I'll write the web-address were the video is.
73 for now. Thank you for your help.
73 FRANK I2DMI
------------------------
Frank,
I don't know what you mean by "power absorption". I
don't see such variations in power output on my analog
meter. If you are using a digital meter, I would
check the meter itself. Does it work stably on some
other transmitter?
For fun I have produced a couple of videos of what I
see on my setup. You can go to
<http://www.aa6e.net/aa6e/orion_pwr.html>
http://www.aa6e.net/aa6e/orion_pwr.html for these.
(Helps to have a fast Internet connection!)
73, Martin AA6E
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|