Tom
I don't remember why . I just turn both keying loops
on after a master reset just out of habbit. no other
reason and the Amp and Orion have worked from day one
with the amp in the qsk position. I have only used
CW one time to give a QRPer a 20 meter CW contact he
for WAS.I have not lost transmit on my Orion in a
year or more . I think Ten-Tec corrected that problem
in 1.369 or 1.370.I have a friend a big time CW
--- Tommy <aldermant@alltel.net> wrote:
> Thanks for the info John. I appreciate it.
>
> I'm certainly not questioning what your doing John,
> I just don't
> fully understand it. Can you please tell me why you
> have BOTH loop 1
> and loop 2 turned on? Have you done any testing in
> Key Loop 1, using
> CW in full QSK? And have you done any testing using
> Key Loop 2,
> using CW in full QSK? I know you say it works fine
> for you in SSB,
> but my problem is the Orion will randomly stop
> putting out RF when
> using the Titan 3 in either Keying Loop 1 or Keying
> Loop 2. I have
> never operated it with both keying loops turned on
> since I only have
> the Orion connected to one Titan 3.
>
> Certainly would appreciate more information.
>
> Thanks John.
>
> Tom - W4BQF
>
> "So you have enemies?
> Good.
> That means you have stood up for something,
> sometime in your life."
> --Sir Winston Churchill--
>
> ----- Original Message -----
> From: "John Sheeley" <wb4qda@yahoo.com>
> To: <tentec@contesting.com>
> Sent: Friday, December 24, 2004 1:45 PM
> Subject: Re: [TenTec] Contest Data and Conclusions
>
>
> >I have Loop one and loop 2 turned on and the Titan
> 3
> > has worked for a year .I don't remember which
> Orion
> > Ruf I was using when I first got my Titan3 but
> the
> > Amp has worked with
> > with all the Orion updates over the last year
> > including 1.372
> > and qsl properly connected TxEN and
> > TxOUT cables.
> >
> > John
> > WB4QDA
> >
> > --- Tommy <aldermant@alltel.net> wrote:
> >
> >> I don't know if the problem is just with CW, but
> >> since you have no
> >> problems with the keying loop, it certainly would
> >> seem like a CW
> >> only problem. I have only tried SSB with the
> Orion
> >> and Titan one
> >> time for a short QSO.
> >>
> >> This is very interesting as you are the first
> person
> >> in 18 months
> >> that has actually said they are running an Orion
> and
> >> a Titan 3,
> >> other than myself. Are you using Keying Loop #1
> with
> >> your Titan? Did
> >> you have to do anything other than properly
> connect
> >> the TxEN and
> >> TxOUT cables? What version of firmware are you
> >> running? My
> >> combination DOES work OK using v1.369, but none
> of
> >> the other
> >> firmware versions.
> >>
> >> Any additional info would be greatly appreciated
> >> John.
> >>
> >> Tom - W4BQF
> >>
> >> "So you have enemies?
> >> Good.
> >> That means you have stood up for something,
> >> sometime in your life."
> >> --Sir Winston Churchill--
> >>
> >> ----- Original Message -----
> >> From: "John Sheeley" <wb4qda@yahoo.com>
> >> To: <tentec@contesting.com>
> >> Sent: Friday, December 24, 2004 10:43 AM
> >> Subject: Re: [TenTec] Contest Data and
> Conclusions
> >>
> >>
> >> > Tommy
> >> >
> >> > Very Strange
> >> > MY Titan III works works fine with my Orion's
> >> keying
> >> > loop for SSB. Does it just happen with CW ??
> >> >
> >> > WB4QDA
> >> > John
> >> >
> >> >
> >> > --- Tommy <aldermant@alltel.net> wrote:
> >> >
> >> >> And while your doing what Bill suggest with
> >> Yaesu,
> >> >> also pick up the
> >> >> phone and call Ten Tec and ask them about
> fixing
> >> the
> >> >> Orion firmware
> >> >> so their Titan 3 will work on the Orion's
> keying
> >> >> loop. The standard
> >> >> answer you get is "Gosh, we have never heard
> of
> >> that
> >> >> problem
> >> >> before...are you sure you have all three wires
> >> >> hooked up correct?"
> >> >>
> >> >> Ten Tec's support for non-warranty products:
> >> "three
> >> >> to four weeks
> >> >> before we can look at it"...but of course at
> >> least
> >> >> they will
> >> >> eventually look at it!
> >> >>
> >> >> Tom - W4BQF
> >> >>
> >> >> "So you have enemies?
> >> >> Good.
> >> >> That means you have stood up for something,
> >> >> sometime in your life."
> >> >> --Sir Winston Churchill--
> >> >>
> >> >> ----- Original Message ----- > I feel
> >> they
> >> >> are there on both
> >> >> counts. The superiority of their
> >> >> > product has already been established by
> ARRL,
> >> >> RSGB, Sherwood,
> >> >> > W8JI and others. The superiority of their
> >> support
> >> >> can be tested
> >> >> > by picking up a telephone and comparing
> their
> >> >> support to any of
> >> >> > the 3 majors. Just try calling Yaesu to ask
> >> them
> >> >> if they will
> >> >> > fix your brand new MP's clicks for starters.
> >> ;-)
> >> >> >
> >> >> >
> >> >> 73, Bill W4ZV
> >> >>
> >> >>
> _______________________________________________
> >> >> TenTec mailing list
> >> >> TenTec@contesting.com
> >> >>
> >>
> http://lists.contesting.com/mailman/listinfo/tentec
> >> >>
> >> >
> >> >
> >> >
> >> >
> >> > __________________________________
> >> > Do you Yahoo!?
> >> > Yahoo! Mail - now with 250MB free storage.
> Learn
> >> more.
> >> > http://info.mail.yahoo.com/mail_250
> >> > _______________________________________________
> >> > TenTec mailing list
> >> > TenTec@contesting.com
> >> >
> >>
> http://lists.contesting.com/mailman/listinfo/tentec
> >>
> >> _______________________________________________
> >> TenTec mailing list
> >> TenTec@contesting.com
> >>
> http://lists.contesting.com/mailman/listinfo/tentec
>
=== message truncated ===
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|