Seems like everyone's off eating Turkey, Jeff.
We don't celebrate thanksgiving over here in Germany, so I didn't get any
(sniff).
Anyway, as I recall, the Ten-Tec mics never had an amplifier.
The battery was previously used for the electrolyte capsule.
In the meantime the newer radios have +9v on one of the pins of the mic
connector for this purpose.
I NEVER used any preamplifier with my 444 and it worked with ALL of my
Ten-Tecs, OMNI V thru VI+, Jupiter, and Orion.
73 and happy T-Day,
Rick
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Jeff Frank
Sent: Thursday, November 25, 2004 6:44 AM
To: Jim Brown; tentec@contesting.com
Subject: Re: [TenTec] Question regarding Omni VI+ on SSB
Thanks to all you guys who responded to my query about the best mic setup
for the Omni 6 --- one more thing --- the Tentec mic is amplified (because
it uses a battery) --- does that mean I should try and use some kind of
amplification ahead of the radio if I want to try a Heil element or a D104
or a Shure 444? (I have all three mics). By the way, Happy Thanksgiving to
All.
Thanks,
Jeff (KX2P)
----- Original Message -----
From: "Jim Brown" <jim@audiosystemsgroup.com>
To: <tentec@contesting.com>
Sent: Wednesday, November 24, 2004 10:40 PM
Subject: Re: [TenTec] Question regarding Omni VI+ on SSB
> On Wed, 24 Nov 2004 18:27:11 -0500, Jeff Frank wrote:
>
> >ll you guys who report about the great audio reports you receive on ssb
> >with the Omni 6 series please tell me what microphones or microphone
> hook
> >ups you are using.
>
> Ah -- you bring up a very interesting defect in the design of the Ten Tec
rigs.
> You can't use a "flat" mic with them, you need to use one that has a
"hyped"
> high end. That's what the Heil mics do. A good mic sounds really dull and
> bassy on a Ten Tec radio.
>
> I use an RE-27, which is a pretty flat mic (and a damn good one) with
mine.
> But to make it sound good, I had to stick a rather small cap in series
with it
> to drastically roll off the low end (-3 dB at roughly 2 kHz). It is absurd
that it
> should be necessary to do that, but it is. This is a "band-aid," but it
works. I
> even have an audio file that NY9H recorded off the air several months ago
> on 20 meters from Chicago, when I was operating this rig at W6BX, a 2,000
> mile path. It's this mic, the cap, and the Omni V. I could email the file
if
> anyone cares.
>
> The Shure 444 and mics like it have the hyped high end that sounds pretty
> good with the Omni family of radios. I bought one for that reason. BTW --
> there's no good reason to spend money on a Heil mic to get that sound -- a
> used 444, $30 on EBay, will sound at least as good as a Heil. For that
> matter, I bought three Plantronics earsets for $5 each at a hamfest last
year.
> They get MUCH better reports on my 746 than a Heil does on my K2. You
> can buy the Plantronics earsets (earphone plus mic) for $25 - $40 brand
> new at computer stores.
>
> Now, you say, why in the world would you use an RE-27 on a ham rig?
> Simple. I'm in the pro audio biz and own a lot of very good mics, but very
few
> dynamic mics. Also, most dynamic mics have proximity effect, which boosts
> the low end (makes them muddy) when you close-talk them). I didn't have a
> dedicated ham mic, needed one to use with the Omni V I had just bought,
> and the RE-27 came the closest to what should work well. It is a dynamic
(I
> only have three types) it has no proximity effect because it is a
variable-D
> cardioid, and it has a lot of output. Isn't it serious overkill? If I
had to buy it,
> yes. But if I have several laying around, no.
>
>
> Jim Brown K9YC
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|