Hi Dave,
Thanks for the info.
I have never used it on AM, and simply used the information that was in
the manual. I guess that is the advantage of software radios!
Thanks.
73,
Ken, W8EK
Ken Simpson
E-mail to KenW8EK@hotpop.com or W8EK@arrl.net
Voice Phone (352) 732-8400
> -----Original Message-----
> From: David McClafferty [mailto:ve1adh@yahoo.ca]
> Sent: Friday, October 29, 2004 7:40 PM
> To: KenW8EK@hotpop.com; tentec@contesting.com
> Subject: Re: [TenTec] TenTec Pegasus 550 HF xcvr FS
>
>
> If it has the latest firmware it will transmit AM as
> well as receive.
>
> Dave, VE1ADH
>
> --- "Ken Simpson, W8EK" <W8EK@speakeasy.net> wrote:
> > For Sale:
> >
> > Ten-Tec Pegasus Model 550 HF transceiver
> >
> > Covers 160 thru 10 meters, although it can be used
> > with a transverter for 6 and 2 meters, and will
> > display
> > the 6 or 2 meter frequency on the screen.
> >
> > It will transceive SSB, CW, FM, or AFSK, and receive
> >
> > AM. Of course it is also ideal for digital modes
> > such
> > as PSK31, pactor, etc. It has 2 VFOs and 1000s of
> > Memories, and full break-in on CW.
> >
> > This rig is very close to a "software definable"
> > rig, in
> > that most of the rig is controlled from the computer
> > and
> > computer program. There are no knobs on the rig.
> > Everything is on the computer screen. It makes for
> > a rig that can be changed by changing the software.
> > DSP filtering is provided, that is quite effective,
> > so
> > no crystal filters are needed. Bandwidths go from
> > 300 Hz to 8 KHz, with 1.5 to 1 shape factors, or
> > better.
> >
> > This particular unit is in excellent condition, with
> > latest
> > firmware. It looks and performs almost like new. No
> >
> > scratches, dents, or dings. TenTec operating
> > control
> > software is included in both 16 bit and 32 bit
> > operating
> > systems, so you can use an older version of Windows
> > or the latest version. Of course it has the power
> > cord
> > and complete manual with it. It needs 13 V DC at
> > about 20 amps to operate.
> >
> > $600 plus shipping from Florida.
> >
> > Thanks.
> >
> > 73,
> >
> > Ken, W8EK
> >
> > Ken Simpson
> > E-mail to KenW8EK@hotpop.com or W8EK@arrl.net
> > Voice Phone (352) 732-8400
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|