Thanks to all that replied. I have a d104 mike that's worked OK on my Omni D
so I thought that the mike must be OK . I looked inside the mike and the
wire that is grounded though the Normal Closed switch had been unhooked. I
re hooked the wire , now the radio works find. THANKS FOR ALL HELP
Garry WW9GT
Omni D , Triton IV, Century 21 , TX 100 , RX 10 , and a KR 20 keyer
----- Original Message -----
From: "Scott / W4PJ" <w4pj@bellsouth.net>
To: <tentec@contesting.com>
Sent: Saturday, September 25, 2004 10:41 AM
Subject: [TenTec] Re: Model 540 Microphone ?
> I wired up an old Cobra hand mic to a 1/4" Stereo plug and it worked fine
on
> my Model 540's. D-104 G stand worked fine. Currently have an amplified
> Shure 526T wired up. Gotta watch the amplification level in the Shure to
> keep from overdriving on peaks.
>
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|