TenTec
[Top] [All Lists]

Re: [TenTec] RF

To: <tentec@contesting.com>
Subject: Re: [TenTec] RF
From: "Jim Miller WB5OXQ" <wb5oxq@grandecom.net>
Reply-to: tentec@contesting.com
Date: Fri, 10 Sep 2004 19:36:06 -0500
List-post: <mailto:tentec@contesting.com>
I wonder if you have a grounding problem.  I run sstv using my omni6+
connected to my pc and no problems even with the amplifier on running 500
watts.  I use home a home brew keying device connected to a serial port on
the pc with 1 transistor and 2 resistors to the key jack.  Never had any
problems.  I have used a cw keyboard and psk32 using the same stuff with no
problems even with the centurion driven near max output.  You must have rf
floating in the shack somehow.  i do not have any kind of rf blocking
devices on my cables either.
----- Original Message -----
From: "George Allgood" <w4gfa@bellsouth.net>
To: <TenTec@contesting.com>
Sent: Friday, September 10, 2004 4:14 PM
Subject: [TenTec] RF


> I'm having RF attacks.  My OMNI VI+ with computer wired to the Key jack
swamps when I strike a key on the keyboard.
> The problem goes away if I reduce power on the OMNI to about one half.
It's a problem trying to use contest programs
> to key the rig.    Anyone have a source for high quality, shielded cables
and connectors for this purpose?
> I've placed  Ferrite cores on each end of the existing home brew cable,
but no cigar.  Any suggestions would be most
> welcome.
> George W4GFA
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>