TenTec
[Top] [All Lists]

Re: [TenTec] Differences in Paragon I and II?

To: <tentec@contesting.com>
Subject: Re: [TenTec] Differences in Paragon I and II?
From: "Vic Klein" <vhklein@ptd.net>
Reply-to: tentec@contesting.com
Date: Mon, 16 Aug 2004 22:02:11 -0400
List-post: <mailto:tentec@contesting.com>
Good comparison. Note that by substituting a Giehl chip for the original
chip in the PI (a simple plug-in install) you get the band-stacking
registers and one-touch changing to any band as well. This is a worthwhile
inexpensive upgrade and is still available.

=Vic=
WA4THR

> Computer logging is definitely possible with the Paragon II.  The Paragon
II
> uses an Icom CIV computer interface just like the Omni VI.  The main
> difference between the PI and PII is the PII has band registers and in
> general a much nicer user interface.  Functionally, the two are about the
> same except the PII has transmit AM although the transmit AM is USB or LSB
> with a carrier added.  You can control which sideband you transmit on AM
but
> you can't transmit both sidebands.  On AM it transmits just like CHU.  CHU
> transmits USB with a carrier.

> Carl Moreschi N4PY
> Franklinton, NC

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>