Thanks Lee, thats good info. I keyed an old Yaesu with a external relay
many years ago. Looks like I'm going to go look in the "ol" junk box.
73 Josh
----- Original Message -----
From: "B. Lee Cornwell" <k2blc@earthlink.net>
To: "Josh Kelly" <jkelly@hiwaay.net>; <tentec@contesting.com>
Cc: "Josh" <jkelly@hiwaay.net>
Sent: Tuesday, July 20, 2004 6:05 PM
Subject: Re: [TenTec] Argonaut V/Titan III-more
> Hi Josh - I keyed my 30L1 via an external 12V relay and the switching
> transistor in the 705 mic. It worked for me!!
> 73 Lee K2BLC
>
> ----- Original Message -----
> From: "Josh Kelly" <jkelly@HiWAAY.net>
> To: <tentec@contesting.com>
> Cc: "Josh" <jkelly@HiWAAY.net>
> Sent: Tuesday, July 20, 2004 8:19 AM
> Subject: [TenTec] Argonaut V/Titan III-more
>
>
> Many thanks for MANY responses to my post both direct and on
>
> the reflector. Most want to know how much pwr. the Titan II would
>
> produce. I can tell you that 20 wts. from my Orion will get 600 to
>
> 800 wts. out. Many others wanted to know if anyone had figured
>
> out "how to". That's what most of us want to know. What is the best
>
> way to hook up a TenTec Argonaut V, mod. 516 to a TenTec Titan III
>
> amp. with some sort of relay for keying. I will keep all up to date if
>
> some kind soul works this out fot the good TenTecism.
>
> Thanks again es 73, Josh. N4VB jkelly@hiwaay.net
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|