Sounds like a conversion of the OMNI-D to an OMNI-D series B (or
whatever they were called!) There was a "conversion" kit as I recall
to add more filtering, the early OMNI-D had a squelch and the later
ones did not. I think you got an interesting model, good for you.
Just about any manual will be "correct" in most respects, the receiver
/ transmitter strips didn't change a lot.
Clark
WA3JPG
On Jul 17, 2004, at 10:55 AM, Werner 'Joe' Jochem DK7VW wrote:
Two days ago I purchased an Omni D - S/N 546-2280. Since the vendor
didn't
provide an Owner's Manual I tried to find one via internet.
On www.qsl.net/tentec I found the different types of Omni D (546, 546B,
546C) and downloaded the manual for the 546 (the only one available
there).
Looking at the pictures showing the front panels of the different Omni
types
and the downloaded manual I have to confess: I am confused. My Omni
doesn't
match to any of the shown types, ups ...
1. The selectivity is chosen by a rotary switch with four positions:
CW-1,
CW-2, CW-3, SB.
2. There's no notch filter, but a squelch knob (with on/off function)
Any idea which type of Omni D I purchased and where I can get the
appropriate owner's manual? Many thanks!
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|