[TenTec] For Sale - Long List

[Anthony Luscre K8ZT <aluscre@neo.rr.com>]

K8ZT's 4th Annual Major Shack Clearance Sale
**********************************************************
Please reply directly to me and not to the mailing list.
Refer to item #s when inquiring.
*** (Please read all notes below the list of equipment.)
----------------------------------------------------------------------

TEN TEC-
#9- Ten-Tec - Delta 580 - Includes WARC bands, works fine, has both CW 
and SSB filters. Cosmetically 8 out of 10 - $325

#10- Ten Tec Delta 580 - this second Delta has had intermittent problems 
with output/input. Originally had no power out or receive. Changed the 
diodes in final switching section and it now receives fine. But still 
having problems with power output not sure if bad finals, bad driver 
transistor or other problem. No more time here to finish repair. This 
would make a great buy for handy person to repair or to just use as for 
an excellent all band 10-160 receiver for use with your home brewed QRP 
transmitters $150

------- Special package offer both #9 & #10 together for $415

#11- Ten Tec Omni-D. Excellent condition both electrically and 
cosmetically. Covers10M-160M but no WARC bands $ 300

#12-  Ten-Tec - Argosy Model 525 (Analog) works fine, cosmetically 8 out 
of 10 - $275

#13-  Ten-Tec - Argosy Model 525 (Digital) works fine, cosmetically 8 
out of 10 - $275

#14- Ten Tec- Model 225 Power Supply matches Argosy Analog or Digital $35

#15- Ten-Tec - 80 Meter QRP CW Transceiver Model 1380 - $85

#16- Ten-Tec - 9-Band SW Receiver Model 1253 - $50

#25- MFJ Model 432 - Voice Keyer, Internal settings let you change mic 
connections for Kenwood, Icom, Yaesu, etc. Plus I have added an 
additional output pig tail for 4 pin Ten Tec radios. Very Good 
Condition- $95


-QRP-
#1- Yaesu FT-817 (Mint, complete as from the factory, but missing box. I 
do have all

#7-  Icom 703 - Labeled as HF/6M but is actually only HF. Not the Plus 
Model, covers 10 through 160 meters, no 6 meters. (Mint, complete as 
from the factory except power cable has been shortened) $440

#8- Icom IC-202 portable 2 meter SSB/CW with mic $120

#12-  Ten-Tec - Argosy Model 525 (Analog) works fine, cosmetically 8 out 
of 10 - $275

#13-  Ten-Tec - Argosy Model 525 (Digital) works fine, cosmetically 8 
out of 10 - $275

#14- Ten Tec- Model 225 Power Supply matches Argosy Analog or Digital $35

#21- LDG Z-11 QRP Automatic Antenna Tuner (latching relays) $135

#22- LDG QRP Automatic Antenna Tuner (non-latching relays) $105

#23- MFJ- QRP CW Transceiver Model 9015 - $75

#24-  MFJ- QRP CW Transceiver Model 9020 - $75-

-YAESU-
#1- Yaesu FT-817 (Mint, complete as from the factory, but missing box. I 
do have all paper work and will throw-in a small soft side carry case.) $475

#2- YSK-100 Separation cable for Yaesu FT-100 or FT-100D (used) $60

#3- Yaesu- FT-470 Dual Band HT - $150

#4- Yaesu- FT-33 220 HT - $180

#5- Yaesu FT-109 222 HT- $100

#6- Yaesu 230-R Mobile 2 Meter FM with Touch Tone Microphone- $65

-ICOM-
#7-  Icom 703 - Labeled as HF/6M but is actually only HF. Not the Plus 
Model, covers 10 through 160 meters, no 6 meters. (Mint, complete as 
from the factory except power cable has been shortened) $440

#8- Icom IC-202 portable 2 meter SSB/CW with mic $120

-HEIL-
#19- Heil Mic Element HC-4 "DX Dream Machine". This is the element only 
and they are currently unavailable from Heil 
(http://www.heilsound.com/hcelements.htm) $19

-LDG-
#20- LDG AT-11 Automatic Antenna Tuner $120

#21- LDG Z-11 QRP Automatic Antenna Tuner (latching relays) $135

#22- LDG QRP Automatic Antenna Tuner (non-latching relays) $105

-MFJ-
#23- MFJ- QRP CW Transceiver Model 9015 - $75
#24-  MFJ- QRP CW Transceiver Model 9020 - $75

--special offer package deal #23 and #24 both for $130

#25- MFJ Model 432 - Voice Keyer, Internal settings let you change mic 
connections for Kenwood, Icom, Yaesu, etc. Plus I have added an 
additional output pig tail for 4 pin Ten Tec radios. Very Good 
Condition- $95

-RADIOSHACK-
#26- Radio Shack- HTX-10 10 Meter SSB/FM - mobile mount & mic - mint in 
box- $85

#27- Radio Shack- HTX-212 Mobile 2 Meter FM -  mount & touch tone mic - 
near mint $115

-ALINCO-
#28- Alinco- Model 110 FM 2 Meter Mobile  - $115

-VHF/UHF-
#29- Mirage D1010 430 to 450 MHz 100 Watt "Brick" Amplifier

#30- Triplexer- Comet CFX-5140 - A 1.3 to 90 MHz, B 130-200 MHz & C 
380-500 MHz. New with manual and plastic carry pouch. $55

#8- Icom IC-202 portable 2 meter SSB/CW with mic


-TOWER & ANTENNAS-
#31- Tower- Heights Aluminum Freestanding 38' on ground good condition. 
Pick up only, or will deliver in Akron, OH area for a small fee -- $185

#32- HF Beam- Butternut HB-5B "Butterfly Beam"-Light weight, covers 
20,17,15 & 10 Meters. I also used mine to work on 6 Meters. See URL for 
more information http://www.texastowers.com/hf5b.htm. Used, partially 
assembled and on ground. Pick up preferred in Akron, OH area or I can 
pack for small additional fee -- $165

#33- Vertical- Butternut HV-6-V - covers 80, 40, 30, 20,15 & 10 Meters - 
Used, in fair to good - condition, partially dissasembed -- Pick up only 
Akron, OH-- $155

-MISC & COMPUTERS-
#30- Triplexer- Comet CFX-5140 - A 1.3 to 90 MHz, B 130-200 MHz & C 
380-500 MHz. New with manual and plastic carry pouch. $55

#34- Xircom USB to RS-232 Serial ports and LTP-1 printer port Windows 
98, power supply drivers $25

#36- Hub- 10-Base-T and wallwart power supply $10

#37- Computer-- Apple Macintosh Power PC Tower includes mouse and 
keyboard and OS

#38- Laptop Computer- Compaq LTE Elete with built in power supply. Color 
LCD display, built in mouse. Good Working condition, 486 is excellent 
for running TR, NA or CT contesting software.  Does not include hard 
drive or battery. Unit will boot from built in floppy drive. (Require 
simple inexpensive 110V AC appliance power cord such  as Radio Shack 
model 61-2878.) $25 each or 3 for $55


*** NOTES - -
1. Unless noted otherwise, all items are currently in good working 
condition.

2. If the buyer is dissatisfied with an item, it maybe returned for 
refund (minus shipping and/or PayPal charges) by first notifying me and 
then receiving written confirmation of return arrangements. No 
additional warranties or other guarantees are provided.

3. No returns will be accepted if buyer has modified, used improper 
voltage/polarity power supply, improperly operated or attachmented 
improper accessories, electrically or physically damaged the equipment 
and/or failed to contact seller before returning item.

4. Payment only with U.S. Post Office Money Order or Pay-Pal

5. Shipping cost paid by buyer unless otherwise agreed upon by seller 
and buyer. I  will ship overseas but additional packaging costs may be 
incurred.

6. Photos for many items are at http://www.qsl.net/k8zt/pics.html. I can 
also e-mail photos of specific pieces of equipment.

7. Prices on many items are negotiable

8. Discounting for multiple item "Package Deals" will considered.

9. Trades (or partial trades) will be considered on some items (no boat 
anchors, tube equipment, scanners, computers or test equipment desired)

10. Please e-mail me for more information on any item.

--
|--------------------------|
    Anthony A. Luscre    
           K8ZT      
       Stow, Ohio	  
|--------------------------|
   Visit My Website at
 http://www.qsl.net/k8zt
|--------------------------|


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec