The nulls would also be very deep even on 160 as long as all the antennas
and grounds are almost identical. I am building a receive only 4 square
with 31 foot verticals for 160 and 80. The information is www.w8ji.com is
priceless and a bible for phased arrays.
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Ken Brown" <ken.d.brown@verizon.net>
To: <tentec@contesting.com>
Sent: Friday, June 11, 2004 5:31 AM
Subject: Re: [TenTec] Vertical Antennas (was Radials)
> > The "nulls" are not really null. In my case, the southern null
> > points at west MS, east TX, and I work everyone who is on there in the
> > contests. Signal strengths are equal in the "nulls", regardless of
> > which way the array is pointed.
>
> Very common to see comparisons of ideal phased arrays versus real phased
> arrays (with losses) showing that deep nulls only in the ideal and
> practically unacheiveable setup for 160 meters. ... Question for the
> experts: If you make a phased array of lossy antennas (say for instance
> quarter wave verticals) which all have identical charcterstics (losses
> are all the same) such as exact number and length of radials and equal
> ground characteristics, could you get deep nulls as with "perfect"
> antennas, but less gain, or would the nulls also be less deep?
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|