Lots of articles from near the beginning of radio on this subject.
I've gotten along very well with 40 radials, 9 degrees apart.
All laying at the ground level, not buried, but not raised, ( use coat
hanger staples and let the grass roots over take it ) This seems to be the
best level for ground mounted vertical on HF. Buried actually detracts some
especially at 6 inches or more.
Varying lengths as the fence cuts off some areas, no less than 15 feet and
no more than the height of the vertical.
This seems to be the balance of benefit to cost & work
More radials does add some, but not enough to justify the cost & work,
Longer radials does add some, but again not enough to justify the cost &
work,
If I?m only getting half a dB gain, then it really isn't enough do justify
the work.
I'd need to get 3 or more dB Gain to justify the work, For a vertical, that
would be these things.
1) A higher vertical would do allot, especially on 80 or 160.
2) Raising the vertical above ground as high as possible, 20 to 30 feet.
3) 4 or 8 half wave Raised radials ( now counterpoise ) sloping down
slightly but at least 10 feet up.
4) a 4 sqaure phase vertical array, using techniques 1,2,3 above.
I'd do these as that would give many many dB Gain, but, it is impractical at
this QTH,
Thus it's back to the basic issue, dB Gain versus cost and space.
for Gound mounted vertical, If you have space, more radials and longer is
better. But at some point though, it's not gaining much and then you have
to weigh how much is worth it for you.
My 2 cents worth.
73's
Rich
K5SF
From: Ken Brown <ken.d.brown@verizon.net>
Reply-To: tentec@contesting.com
To: tentec@contesting.com
Subject: Re: [TenTec] Radials
Date: Tue, 08 Jun 2004 19:23:49 -1000
If I could double my signal, as inexpensively as burying 60 extra pieces
of
the old wire I have laying around, I would most certainly do it in a
heartbeat.
If you've got the money and are willing to spend it paying a laborer to
bury that wire, then it may be "in a heartbeat". Otherwise, even with the
aid of power tools, it will be very many heartbeats and a lot of sweat. And
that, along with the cost of the wire, is why people want to know is 30
quarter wavelenth radials better than 60 eighth wavelength ones (or some
other comparison of equal materials and digging)
DE N6KB
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|