Re: [TenTec] omni 6+ pbt tune

[Bill NY9H <ny9h@arrl.net>]

just checked mine....
on MY set if the pbt is at abt 12 1/2  lsb on 40 & usb on 20 ARE THE SAME..
        I suppose i could take off the knob and re center it ...
unless I am trying to roll off ( band cut) the top & enhance the "bass" 
audio////

bill


At 01:27 PM 5/26/2004, you wrote:

> Mine never did this.  If I have the PBT at 12 o'clock, switching back and
> forth from LSB to USB requires no change of the PBT control.  Likewise,
> CW's normal position in the same.  Now, USB and LSB do tend to have a
> slightly different sound to them, but it's nothing that PBT will change.
> For what it's worth.....
>
> Ray, for clarity purposes, you might want to describe how much you need
> to change the PBT when changing modes.
>
>         73,  Duane
>
>
> On Wed, 26 May 2004 13:06:58 -0500 "Jim Miller WB5OXQ"
> <wb5oxq@grandecom.net> writes:
> > Any time you change from lsb to usb the passband is reversed, so if
> > you are
> > not dead center on the pbt it will change.  My omni 6+ has aloways
> > done
> > this.
> > ----- Original Message -----
> > From: <K5lxz@wmconnect.com>
> > To: <tentec@contesting.com>
> > Sent: Wednesday, May 26, 2004 12:42 PM
> > Subject: [TenTec] omni 6+ pbt tune
> >
> >
> > > I have to adjust the 'PBT" each and every time I change modes on
> > my Omni
> > 6+
> > > and it does not seem normal to me.   Any suggestions for a fix
> > would be
> > > appreciated.
> > > Ray Husher W5EW
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec