On Saturday, March 27, 2004, at 06:30 PM, Jim Larsen - AL7FS wrote:
Which filters must stay with the radio? I would say for sure the 285
and 282 can go. The 220 filter, I am not sure. Is it needed for SSB
or just the unidentified filter? The unidentifiable filter, I am not
sure. My goal is to identify what filters make up a stock radio.
Not sure this part was answered. The 220 must stay (on the little board
in the back. The SSB filter on the left in position 1 must stay. You
won't have a stock radio without these two 2.4 kHz filters in place.
The stock radio came with the pair.
Clark
WA3JPG
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|