TenTec
[Top] [All Lists]

Re: [TenTec] Re: Using Orion with existing 961 PSU

To: tentec@contesting.com
Subject: Re: [TenTec] Re: Using Orion with existing 961 PSU
From: K3BU@aol.com
Reply-to: tentec@contesting.com
Date: Fri, 27 Feb 2004 13:26:39 EST
List-post: <mailto:tentec@contesting.com>
In a message dated 2/27/04 11:35:46 AM Eastern Standard Time, 
k5uj@hotmail.com writes:
>>cw probably a different story.  i fail to 
understand why the orion pulls 24 A when it has (I'm told) the same p.a. as 
the jupiter in it.  <<

My Orion draws 19 - 20 A in CW key down at full power 100W. RX draws almost 3 
A, when the software is loading, it draws 2 A @ 13.8 V

I use MFJ Switching PS 4225MV capable od delivering 25A steady and up to 32 A 
peaks. 
Works very well has V and A meters, adjustable, internal fan and car type 
receptacle.


Yuri, K3BU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>