Hi Pete,
This is the kind of issue that I was considering,
thanks for the suggestion. The rig is new here and
we're shaking it down. I was convinced after the ARRL
DX contest that the PA drivers were weak and we'd need
a trip to the factory for repair. 80 watts on 10
meters folding back to 75 on the yagi. It did not make
sense to me that they would ship a new rig to me with
low output!
But I was running an Astron 35A with a rather long
lead plus an Airpax in line. I later hooked up my 961
supply as an experiment and full power returned. I
suppose it could have been the connector as easily as
the cord itself at the root of the problem.
Thanks again,
Don Rasmussen WB8YQJ/6 ..
I cleaned the pins with contact cleaner, then used an
ice pick to slightly tighten the female (fixed to the
rig) power connector a bit. Tight enough to make me
use some muscle to get the plug end seated! No further
lamp or display dimming.
73 Pete Allen AC5E
__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|