I usually plug in a drill, and run it at a SLOW speed.
Good test for the blanker!
Nothing yet has worked as well as my R4C's blanker!!!
...Dave
----- Original Message -----
From: "Mark Erbaugh" <mark@microenh.com>
To: <tentec@contesting.com>
Sent: Monday, February 16, 2004 9:51 AM
Subject: [TenTec] Omni VI Noise Blanker
> Is there a sure fire way to determine that the Noise Blanker in the Omni
VI
> is working?
>
> I have an Omni VI with option 3 upgrade. Recently, something has happened
to
> a power line near the QTH and I have a pretty consistent S5+ noise level.
> The power company RFI guy has confirmed my problem and they are coming out
> this week to fix it. There problem produces a constant buzz.
>
> At any rate, the Noise Blanker in the Omni VI seems to have absolutely no
> effect on this noise, or any other noise that I've encountered. In fact, I
> can't hear any change in the signal as I rotate the NB knob. To me it
seems
> that the NB not doing anything. I have to admit that prior to the recent
> problem, I've not had much noise (this is a rural location), so I don't
know
> if the NB ever worked.
>
> If there is a problem with my NB, has anyone else had a similar problem
and
> is there something (easy) that I can check? Does the Omni VI need to go
home
> for a tune up?
>
> The DSP Noise Reduction does work.
>
> 73,
> Mark
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|