Lowell,
You can turn the relay "On" or "Off" in the software menu.
It is probably turned off and only needs to be turned on.
I don't have an Omni V anymore so you'll have to check in the
handbook for the menu setting that controls this.
73
Rick
-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of Lowell
Schroeder
Sent: Sunday, February 15, 2004 3:54 PM
To: tentec@contesting.com
Subject: [TenTec] Omni V , aux relay
Greetings;
I recently purchased an Omni V. In checking it out I noticed the
aux
relay to control an external amp or what
ever, is not working. Looking at the board and it appears the
relay
itself is not open. I suspect the transistor
that keys that relay. Has anyone else had this problem? I love
the rig
otherwise, the readout and the receiver
are excellent, and I have had good reports on the audio. Thanks
in
advance for comments or advice.
73 Lowell W9KIR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|