TenTec
[Top] [All Lists]

Re: [TenTec] Jupiter - No Transmit Power on 15 and 17 Meters - UPDATE

To: <tentec@contesting.com>
Subject: Re: [TenTec] Jupiter - No Transmit Power on 15 and 17 Meters - UPDATE
From: "Bill Fulling" <w4njf@email.midflorida.com>
Reply-to: tentec@contesting.com
Date: Wed, 19 Nov 2003 15:06:56 -0500
List-post: <mailto:tentec@contesting.com>
Hi Mike,
Other than the front panel readout,the Peg is basically the same as the
Jupe(the Jupe,s original name was "Pegasus FP")so the troubleshooting hint I
gave to Rick should apply to the Peg also.
73 de Bill W4NJF

----- Original Message -----
From: "Mike Sloan" <gu3whn@cwgsy.net>
To: <tentec@contesting.com>
Sent: Tuesday, November 18, 2003 12:47 PM
Subject: Re: [TenTec] Jupiter - No Transmit Power on 15 and 17 Meters -
UPDATE


> May I advise that a similar problem has recently occurred on my Pegasus.
>
> 73 de Mike
>
> ----- Original Message -----
> From: "Rick Williams" <rick.williams@telus.net>
> To: "TenTec List (E-mail)" <TenTec@contesting.com>
> Sent: Monday, November 17, 2003 10:39 PM
> Subject: RE: [TenTec] Jupiter - No Transmit Power on 15 and 17 Meters -
> UPDATE
>
>
> > In late September Gary (VE7GGJ) encountered a transmit problem with his
> > Ten-Tec Jupiter.  With some troubleshooting assistance from Bill (W4NJF)
> the
> > rig has been repaired.  The problem was a faulty relay on the Low-Pass
> > Filter Board.
> >
> > For those interested I have posted a description of the diagnosis and
> repair
> > procedure on my website.
> >
> > Enjoy.
> >
> > 73,
> >
> > Rick
> > VE7ASR
> >
> > Website:  http://www3.telus.net/ve7asr
> >
> >
> >
> > > -----Original Message-----
> > >>
> > > To: tentec@contesting.com <mailto:tentec%40contesting.com>
> > > Subject: [TenTec] Jupiter - No Transmit Power on 15 and 17 Meters
> > > From: Gary Jacek VE7GGJ
> > > Reply-to: tentec@contesting.com
> > > Date: Mon, 29 Sep 2003 08:03:35 -0700
> > >
> > >
> > > I have discovered that my Jupiter no longer transmits on 15
> > > and 17 meters.
> > > All other bands are working fine.  On 15 and 17 the TX and
> > > ALC lamps are
> > > illuminated, but power out measured on both the Jupiter
> > > display and the
> > > AT-11MP is zero.  I have tried a master reset but it makes no
> > > difference.
> > > Time to get on the phone to TenTec?   73 de Gary VE7GGJ
> > >
> > >
> > >
> > >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>