[TenTec] Software releases

[Bill Tippett <btippett@alum.mit.edu>]

K5UJ wrote:
>The beef is that if you go back through the archives, you will find that in
every single case or nearly every single case, when there has been a release
of new software for the Orion, the release was followed by a flurry of
emails on this reflector from people with problems with the revision.
Anyone can go back and see this; it is a fact.  I believe with the last one,
there were a few people reporting poor tx audio problems whereas with the
previous version they reported tx audio was okay.

        Interesting example because, in fact, that problem was in the 
audio MONITOR,
not the audio itself.  This is probably a good example for all since we need to
make sure the person reporting the "bug" is correct before jumping to 
conclusions.
Once I saw the problem was in the Monitor, I decided to let it ride until 
the next
revision fixed it.  Many so-called "bugs" are actually operator error in 
not following
directions to do a Master Reset or VFOB-LCK Reset.  I even did something 
similar in
reporting a problem with the Heil HC-4 causing distortion reports.  Once I 
read the
manual, I correctly set MIC and SP and got excellent audio reports.

        Orion's entire .ruf file is ~650k which is less than the virus 
updates I download daily.  BTW, if you check that list you attached, they 
are all:

1.  The audio monitor problem (not actual transmitted audio)

11/14/03 Version 1.366
- Modified DSP init sequence to eliminate monitor/sidetone noise problem.

OR...

2.  Operator error in following update instructions.

                                                        73,  Bill  W4ZV




  
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec