See the ARRL test for the 2000 - contains a list of rigs including the VI
>From July 2001 Product review for the Kenwood 2000.
Table 2
Dynamic Range Measurements at
5 kHz Spacing for Several Current
HF Transceivers
5 kHz Dynamic Range (dB)
Transceiver Blocking IMD
Elecraft K2 126 88
ICOM IC-706MKIIG 86 74
ICOM IC-746 88 78
ICOM IC-756PRO 104 80
ICOM IC-775DSP 104 77
Kenwood TS-570D 87 72
Kenwood TS-2000 99 67
Ten-Tec Omni 6+ 119 86
Yaesu FT-847 82 73
Yaesu Mark-V FT-1000MP 106 78
----- Original Message -----
From: <KD7EFQ@aol.com>
To: <tentec@contesting.com>
Sent: Wednesday, October 01, 2003 21:12
Subject: [TenTec] Omni 6+ question
> I have been doing some comparisons of Third order intercept numbers on QST
reviews, but The manual for the 6+ and the QST numbers on the Omni 6+ just
say +12db T.O.I. but does not say if it is measured at 20khz spacing or 5khz
spacing, and I would like to know, as another brand is showing as high as
+17 db T.O.I. at 20khz spacing but it falls to +2 at 5khz. If the 6+ rating
is at 20khz, does anyone know what it is at 5khz? Thanks. 73 Todd
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|