Thanks to all trying to help.
Bob,
The linear is new to me but I have bought used from a
guy in the States. I received it yesterday in three
boxes: one for the RF deck, one for the power supply
and one for the transformer.
I have connected the transformer using the three
connectors. I think there is no way to make a mistake
because the three connectors are different.
I have 220 V here. I don't know what is a regular plug
for you. The power supply came without a plug. I
installed a standard one (2 hot pins and another for
the ground)
What I think is important is that the house circuit
braker blows when inserting the plug in to the power
line with the on/off switch to off. This will discard
deffective tubes?
The guy who sold me the Titan said it was mint and
working.
Yes I have a manual but not very useful to solve my
problem.
Do you think it is a good idea to contact Tentec
support on Monday?
Any help will be very appreciated.
Marcel
--- Bob McLeod <ramcleod@comcast.net> wrote:
> Hope I can give a little direction........
>
> Is the linear new to you, or has it been in service?
>
> The multi-conn. cable , when plugged into the rf
> deck and the P S will let the on/off switch on the
> front of the rf deck turn the ps (the whole unit
> ON). With out the cable plugged in,between the
> pieces, the PS wont turn on. It can't turn on.
>
> I would look at 1.--check the fuses on the PS- they
> should be 20A.
>
> First---Are you using a 220 (or 240) v line??? If a
> wrong plug is used on the cord, that is to say a
> regular (120v) plug has been installed on a cord ,
> to the power supply that is wired for 220/240, you
> would be blowing house fuses or circuit breakers.
>
> Do you have a manual? If not, I can help. There
> are other concerns, but the power is FIRST.
>
> I wanted to get this off to you, more info will
> follow if you need it.
>
> Good luck and be careful , Bob KA1DFO
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|