Ken, I have had the same problem. Where are you getting the better cables
from.
Tnx
Richard
W1OS
----- Original Message -----
From: "Ken Brown" <ken.d.brown@verizon.net>
To: <tentec@contesting.com>
Sent: Wednesday, September 24, 2003 4:28 AM
Subject: [TenTec] Keying lockup problem continued
> Hi all,
>
> I posted a message a few days ago about a problem with my Omni VI and
> Titan getting locked in TX. The problem seems to be related to RF pickup
> by the QSK control cables between the Omni and the Titan. I thought I
> had solved the problem, only to have it happen again tonight. I am
> expecting that better quality cables will solve the problem. Another
> detail I discovered tonight is quite interesting: I turned on another
> receiver to monitor my signal, heard my signal where it should be when I
> key the Omni. When not keyed, and locked up by the RF into the QSK
> cables problem (I presume) I did not hear my signal, even though the
> Bird 43 wattmeter is indicating the same power output as when keyed. I
> do not have a spectrum analyzer, or other way to quickly see where (in
> frequency) the RF is, and I am certainly not going to let this continue
> while I tune the other receiver around to find it. Better just to fix
> it. Interesting though.
>
> Ken N6KB
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|