Hi Carl,
Saw ur other msg that u had sent me the download at 2:41 PM this afternoon.I
had my ole backup 98 system online at that time so its possible it missed
it.Have the main XP system online line now,so go ahead and reshoot it.
73 be Bill W4NJF
----- Original Message -----
From: "Carl Moreschi" <n4py@earthlink.net>
To: <tentec@contesting.com>
Sent: Monday, June 02, 2003 8:38 PM
Subject: Re: [TenTec] Your programs
> Bill,
>
> Yes, WinXP Pro is fine. You don't need any diskettes so $35 is also fine.
> The diskettes are just for people that don't have or know how to use
email.
> Yes, I like to see apicture of the Chinese ACR-155.
>
> 73,
>
> Carl N4PY
>
> N4PY Software for your Ten-Tec Orion, Pegasus, Jupiter, Argonaut V,
> RX-350, RX-320, RX-331, or RX-340
>
> My control program software has been in use since October, 1999. The
> Pegasus/Jupiter control program has been through 58 version updates
> during this time. It is a very mature and stable product. Most of
> the added features are a direct result of user input. All the emphasis
> has been on the product and not on this website!
>
> In order to get my Orion, Pegasus, Jupiter, rx320, rx350, rx331,
> Argonaut V, or rx340 software, you must be a registered user. Over the
> past year, there has been a new software version of the Pegasus/Jupiter
> software each month or two. As a registered user, you will receive
> free updates as they come out for a period of 1 year. After the year
> expires, you will no longer receive updates until you renew your
> registration. Any version you received prior to your registration
> expiring, will continue to operate for as long as you use it. Your
> license to use the software you have received is lifetime. This is
> very different from other Pegasus/Jupiter Software providers.
>
> As long as your registration is current, updates will be emailed to
> you as they come out. There is no website. The Pegasus/Jupiter
> software has been reviewed in the May 2001 QST on page 65. There
> are also several reviews on my software at www.eham.net.
>
> To become a registered user for my Pegasus/Jupiter/RX-350 software,
> mail a personal check (I do not wait for it to clear) for $35 in
> US dollars to
>
> Carl Moreschi
> 173 Cody's Way
> Franklinton, NC 27525
>
> Make the check payable to Carl Moreschi and PLEASE
> include your EMAIL address and call sign. You can also use PayPal.
> Send the money to n4py@earthlink.net to use PayPal.
>
> If you do not have internet access and want the software on
> diskette, there is an additional charge of $10.00 for
> a diskette mailed directly to you.
>
> All my software runs on all windows operatings systems starting with
> Windows 3.1, including Windows 95, 98, 98SE, ME, NT, 2000, and XP.
>
>
> Products:
>
> Orion Control Program
> First Time Registration $80
> Annual renewal Registration $40.00
> This is the N4PY Orion Control Program. It will control
> an Orion transceiver. Additionally, it will allow an RX-340
> to be used as an alternate receiver to the Orion.
> The Orion program features "Smart VFO". This is an intelligent
> algorithm that automatically assigns the best receiver to VFO A
> and VFO B depending on the frequencies of each VFO making the ham band
> only limitation of the Orion's main receiver almost unnoticeable.
> The software also allows the seemless use of transverters
> for the VHF/UHF bands with the display showing the transverter frequency.
> Full configurability directly from the program is available.
> Additionally, there is a save/restore feature for the internal
> memories of the Orion. You can select to run the program in Front
> Panel control mode and have the program monitor the operation of the
> Orion. This allows the software to export a pegasus file interface to
> any logging program that can work with a pegasus. The end result is you
> can now have full logging control of the Jupiter while the Orion is in
> front panel control. You can also decide to run the Orion entirely
> from the program and not use the Orion front panel controls at all.
>
>
> Pegasus/Jupiter/RX-350/RX-320/Argonaut V Software
> Annual Registration $35.00
> This is the N4PY Pegasus Control Program. It will control
> a Pegasus, Jupiter, RX-320, RX-350, or Argonaut V as a primary
> radio. Additionally, it will allow an RX-320, RX-350, second
> pegasus, or second Jupiter to be used as a sub-receiver to the
> primary radio with the sub-receiver following VFO B.
> This allows for full dual receive capabilty for DXer's.
> The software also allows the seemless use of transverters
> for the VHF/UHF bands with the display showing
> the transverter frequency.
> Starting with Version 2.00, full configurability directly from the
> program is available. There is no longer any need to directly modify
> the "pegasus.ini" file to change settings.
> Additionally, there is a save/restore feature for the internal
> memories of the Jupiter, RX-350, and Argonaut V. You can also run the
> Jupiter and Argonaut V in Front Panel control mode and have the program
> monitor the operation of the Jupiter and Argonaut V. This allows the
> software to export a pegasus file interface to any logging program that
> can work with a pegasus. The end result is you can now have full logging
> control of the Jupiter while the Jupiter is in front panel control or
> the Argonaut V.
>
>
> RX-331/RX-340 Software
> First time Registration $100.00
> Annual renewal registration $35.00
> This software marries the RX-331 or RX-340 top of
> the line receivers with a Pegasus or Jupiter to allow
> full transceive operation. The RX-331/RX-340 becomes
> the main receiver with the Pegasus/Jupiter receiver
> following VFO B to allow full dual receive. This is
> a dynamite setup representing the ultimate transceiver
> configuration. The software will also allow the RX-331
> or RX-340 to be used standalone without a Pegasus or
> Jupiter. There is a small modification required to the
> Pegasus/Jupiter to allow the two receivers to share the
> same antenna. Also, a fairly simple interface box must
> be constructed for the software to control muting between
> the two radios. There is a review of this software at
> www.eham.net under HF Transceivers "Ten-Tec RX340/Pegasus
> System".
>
> My webpage at www.ralabs.com/n4py has a screen shot of the program.
> It also allows you to look at the user's manual for the program.
>
> For any questions, send me an email at n4py@earthlink.net
>
>
> Carl Moreschi N4PY
> Franklinton, NC
> ----- Original Message -----
> From: "Bill Fulling" <w4njf@email.midflorida.com>
> To: <tentec@contesting.com>
> Sent: Tuesday, June 03, 2003 12:32 AM
> Subject: [TenTec] Your programs
>
>
> > Hi Carl,
> > Will be sending you the dinero for ur CD program for the Jupe next
> week;Need
> > to to know if its WinXP Pro compatable as I just upgraded my OS.Also got
> my
> > "chinese copy " of the ACR-155 done and will send u the pix of that
also.
> > 73 de Bill W4NJF
> >
> > ----- Original Message -----
> > From: "Carl Moreschi" <n4py@earthlink.net>
> > To: <tentec@contesting.com>
> > Sent: Monday, June 02, 2003 7:02 PM
> > Subject: Re: [TenTec] Some Observations on Orion Stability/Calibration
> >
> >
> > > I am having a hard time understanding where this propagation frequency
> > error
> > > could come from. It seems to me that if WWV was at 15 mhz and I was
> > > receiving a 14.999990 frequency, this 10 hertz frequency error would
be
> > > building up some place in a time warp! I could understand an
> > instantaneous
> > > error over a few milliseconds but it should average out to be right on
> the
> > > mark in a few seconds. If it doesn't, then either WWV or my station
are
> > > moving relative to one another and there is a doppler shift going on!
> > >
> > > Carl Moreschi N4PY
> > > Franklinton, NC
> > > ----- Original Message -----
> > > From: "Gary Hoffman" <ghoffman@spacetech.com>
> > > To: <geraldj@isunet.net>; <tentec@contesting.com>
> > > Sent: Monday, June 02, 2003 10:39 PM
> > > Subject: Re: [TenTec] Some Observations on Orion Stability/Calibration
> > >
> > >
> > > > Jerry...
> > > >
> > > > How do you know that propagation delays cause about a 1 ppm error ?
I
> > > have
> > > > not found that figure referenced elsewhere, and would like to know
how
> > to
> > > > measure or estimate it. Thanks !
> > > >
> > > > Gary
> > > >
> > > > ----- Original Message -----
> > > > From: "Dr. Gerald N. Johnson, electrical engineer"
> <geraldj@isunet.net>
> > > > To: <tentec@contesting.com>
> > > > Sent: Monday, June 02, 2003 3:05 PM
> > > > Subject: Re: [TenTec] Some Observations on Orion
Stability/Calibration
> > > >
> > > >
> > > > > TC stands for Temperature Compensated, NOT Temperature Controlled.
> So
> > > > > the oscillator controls should be responding to its environment.
> > > > >
> > > > > But HF propagation causes short term variations in frequency of
> about
> > 1
> > > > > part per million, 20 HZ at 20 MHz WWV so the measurements may not
be
> > of
> > > > > the TCXO but likely are of propagation changes. Frequency
> measurement
> > > > > specialists expect it to take a month of averaging HF WWV signals
to
> > get
> > > > > to within that 1 PPM. Hoping to do it in hours just isn't going to
> > > > > happen.
> > > > >
> > > > > Only propagation at VLF, like 20 and 60 KHz can allow better
> frequency
> > > > > distribution than a PPM, and then its not right if there's an
aurora
> > > > > about like there has been last week.
> > > > >
> > > > > 73, Jerry, K0CQ
> > > > >
> > > > > --
> > > > > Entire content copyright Dr. Gerald N. Johnson, electrical
engineer.
> > > > > Reproduction by permission only.
> > > > > _______________________________________________
> > > > > TenTec mailing list
> > > > > TenTec@contesting.com
> > > > > http://lists.contesting.com/mailman/listinfo/tentec
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > TenTec mailing list
> > > > TenTec@contesting.com
> > > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|