Bill, make sure to use the lowest possible signal level into the program for
best accuracy. The trace should be clearly visible but very little
background noise should appear. Overdriving will introduce frequency errors.
73/72, George
Amateur Radio W5YR - the Yellow Rose of Texas
Fairview, TX 30 mi NE of Dallas in Collin county EM13QE
"In the 57th year and it just keeps getting better!"
<mailto:w5yr@att.net>
----- Original Message -----
From: "WILLIAM MANSEY" <wa2pvk@msn.com>
To: <tentec@contesting.com>
Sent: Wednesday, June 04, 2003 4:31 PM
Subject: Re: [TenTec] Some Observations on Orion Stability/Calibration
As I type I am looking at the DigiPan Waterfall display using George's
method. The 500 Hz. was dead on but I am seeing a frequency of 1047.2 Hz.
with the Orion tuned to 10.001.00 LSB. This IS quite interesting indeedie.
I shall have to try this with my Argonaut V to see where its TCXO "is".
Thanks George! 73, Bill
wa2pvk@msn.com
Please visit my home page:
http://mysite.verizon.net/wa2pvk
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|