Thanks to all that responded. My local Radio Shack did not have the part,
but was able to get it on line from Radio Shack. Problem solved (or will be
when I get the parts.) Thanks to all. (Can't use it now anyway - sent the
OMNI VI+ in for maintenance- little thing about sensitivity - when I got the
Jupiter it was obvious that my problems with the OMNI VI+ was more than just
an insensitive S-Meter (:>}
Dave K5WNV
----- Original Message -----
From: "Jim & Marge Isom" <jhisom@gte.net>
To: <tentec@contesting.com>
Sent: Wednesday, June 04, 2003 7:45 AM
Subject: RE: [TenTec] TenTec Mic Connectors
> i use my ten tec for voice and digital so i must switch the mic, i use a
> data transfer switch to perform this
>
> -----Original Message-----
> From: tentec-bounces@contesting.com
> [mailto:tentec-bounces@contesting.com]On Behalf Of Stuart Rohre
> Sent: Tuesday, June 03, 2003 6:11 PM
> To: tentec@contesting.com
> Subject: Re: [TenTec] TenTec Mic Connectors
>
>
> Have you tried Radio Shack? IF not there, then try Mouser for the part.
> Not sure of the manufacturer, but could look at mine tonite.
> 73,
> Stuart K5KVH
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|