TenTec
[Top] [All Lists]

[TenTec] So *That's* Why They Measure That

To: <tentec@contesting.com>
Subject: [TenTec] So *That's* Why They Measure That
From: al_lorona@agilent.com (al_lorona@agilent.com)
Date: Fri May 30 23:11:30 2003
One of the customary measurements in the ARRL product reviews of amateur 
transceivers is a screen shot of the transmitted CW waveform.

In general, Ten Tec radios test favorably while other radios frequently suffer 
from a variety of maladies, including sometimes severe shortening of the first 
dit. Nearly every non-Ten Tec radio has something wrong with the first dit, 
whether it's shortening, a power overshoot, or rise time problems.

About five months ago, I began to receive QSL cards via my bureau from a number 
of DX stations, but I worked none of these stations. Some of the QSOs were from 
periods when I didn't even have my station set up, so I suspected that my call 
sign was being pirated, until I recently received a nice letter from W6ZX 
asking me if I had worked a certain Yugoslavian station. Apparently, 'ZX had 
worked the Yugoslavian, sent a QSL card to him, and received a 'not in my log' 
reply. Instead, the Yugoslavian explained, he had worked "W6LX" at that date 
and time. 

I think you know where this is going. The mystery was suddenly solved for me. 
W6ZX, an avid DXer, had been working up a DX storm, but unfortunately his 
non-Ten Tec radio suffers from shortening of the first dit, which frequently 
turns "W6ZX" into "W6LX".

We'd better put all the other technical discussions on hold until manufacturers 
get this one, simple, little thing right.

Al  W6LX

<Prev in Thread] Current Thread [Next in Thread>