TenTec
[Top] [All Lists]

[TenTec] Pegasus TX problem redeux and 756pII whining

To: <tentec@contesting.com>
Subject: [TenTec] Pegasus TX problem redeux and 756pII whining
From: kb2m@comcast.net (jeffrey griffin)
Date: Thu May 22 13:53:33 2003
  I also agree that it's looking more like bad finals every day. I was 
thinking of swapping the finals module from my Orion to test...Only 
kidding!
  It was kinda interestering to see the whole process unfold right 
before my eyes...I called TenTec and told them that is was maybe less 
then a year ago that I had origionally sent the Peg in. Paul said they 
would take that into consideration. So I'm shipping the rig tomorrow. 
Thanks for all the input from the group...
 And by the way stop at the ic756pro2@yahoogroups.com, the thread will 
look very simular here's a comment from that SIG...

   I broke down at Dayton and purchased a PRO II. But, I've noticed 
that there are a lot of people on the reflector complaining about 
various things.  It seems to me a quality control issue for the most 
part.


It's the same all over......


73 Jeff kb2m
 



----- Original Message -----
From: Duane Grotophorst <n9dg@yahoo.com>
To: <tentec@contesting.com>
Date: Thursday, May 22, 2003 9:45 am
Subject: Re: [TenTec] Pegasus TX problem redeux

> 
> Yupp, I'm with Carl on the bad finals assessment given
> this new information about the high idle current and
> heat sink temp.
> 
> Duane
> N9DG
> 
> 
> --- Carl Moreschi <n4py@earthlink.net> wrote:
> > Sounds like bad finals to me.
> > 
> > Carl Moreschi N4PY
> > Franklinton, NC
> > ----- Original Message -----
> > From: "Jeff Griffin" <kb2m@comcast.net>
> > To: <tentec@contesting.com>
> > Sent: Thursday, May 22, 2003 11:24 AM
> > Subject: Re: [TenTec] Pegasus TX problem redeux
> > 
> > 
> > > Thanks for the info Duane. The relay's are
> > switching(clicking) as I switch
> > > bands. And appear to be working properly, or just
> > as you described. I also
> > > noticed today that the heat sink get's very warm
> > when the Peg is turned
> > > on(on any band) and not transmitting. I just
> > measured the current, while
> > > idling, it's pulling 7.5 amps at 13.8 volts. It's
> > going to be a rainy
> > > weekend here on the eastcoast, and I'm off for 4
> > days, looks like I have
> > > found something to do!
> > >
> > > 73 Jeff kb2m


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Pegasus TX problem redeux and 756pII whining, jeffrey griffin <=