> Grant sent along, in part:
>
> > At the risk of stating the obvious, I'd bet a phone call to
> > Ten-Tec would get you the answer you need.
>
> Will try that in the morning (HST, which means, 7 AM here
> is 1 PM at TT, hi). Will call AFTER my second cup of coffee.
>
> > Aside from inadvertantly sending RF to a QSK-5 without pulling
> > the key line low , I've never had a problem with one.
>
> The problem I "seem" to have is with the open frame relays.
> On rcv, the rcvr seems to go deaf! Why? I guess because
> the contacts on those relays get gritty. However, the circuit
> schematic provided with the -5 is impossible to follow! Many
> lines go out to terminate in hyrogliphics. One might expect to
> find the same symbol elsewhere on one of the diagrams to
> determine where it connected! However, it is NOT possible, hi.
>
> There seems no way to see where things are going in that thing
> from the manual diagrams. I would love to be able to continue to
> use the -5 with the Orion, if ony I knew how to reliably be sure
> the -5 was operating properly! Sort of frustrating!
>
> 73, Jim KH7M
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|