Hell oKen,
I run my Jupiter on PSK-31 w/o any interface except a "rat shack" 1:1
isolation xfmr in the xmit audio line.The sound card settings can be very
touchy,and I highly recommend that you use a Heathkit monitor scope (eg
HO-10 or SB-610) set them up.Using VOX is a real pain in the butt,but my
program (WinPSKse) does not allow direct PTT keying-while in Peg emulation
mode.If you use the Jupe as a straight Jupiter,direct PTT keying is possible
if you use the hombrew interface shown on pg 2-6 of theARRL's HF Digital
handbook. Try it and see-the parts cost about $5.00 at the Shack.
73 de Bill W4NJF
Bill Fulling
w4njf@email.midflorida.com
----- Original Message -----
From: "Ken Kirkley" <no4d@charter.net>
To: <TenTec@contesting.com>
Sent: Saturday, April 05, 2003 5:11 PM
Subject: [TenTec] Jupiter & PSK31
Anyone out there running their Jupiter on PSK31 without the use of a TNC or
Rigblaster? Is it possible to run it on VOX as we do the Argonaut V? If so,
what are your VOX settings?
73 & God Bless,
Ken/NO4D
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|