TenTec
[Top] [All Lists]

[TenTec] Paddle connector / speaker connector

To: <tentec@contesting.com>
Subject: [TenTec] Paddle connector / speaker connector
From: althofft@concentric.net (Tom A)
Date: Wed Apr 2 09:43:10 2003
I'll go grab the manual off the website now.

A key jack on the front of a rig...just like the good old days!  Wonder if
the keyer can be configured as a bug which then you allow you to plug a
straight key into the paddle jack for straight key nite? (I know...RTM!)

I'm keeping my Omni-V.9+ as a spare rig.  It beat out my old TS-930 for cw
selectivity close-in.   I'll do a side by side with the Orion when it
arrives.

I'm living vicariously through you current Orion owners... As you come
across things you find extra cool or if there is anything you see that
disappoints you please pass it along.

Tom K2TA

----- Original Message -----
From: <AC5E@aol.com>
To: <tentec@contesting.com>
Sent: Tuesday, April 01, 2003 7:46 PM
Subject: Re: [TenTec] Paddle connector / speaker connector


> Hi: The speaker, singular, takes a standard 1/4" telephone plug.
>
> One key jack is a standard telephone jack just to the right of the
headphone
> jack on the front panel, the other is a 1/8" stereo jack on the back. Both
> jacks are wired tip/dit; ring/dah; and body ground.
>
> The Phone jack is next to the mike jack, just to the left of the key jack.
> There was a label warning on the front, Stereo headphones only. MONO
phones
> will short the two audio amps together and result in failure.  The
panoramic
> recieve  is great, by the way.
>
> And to answer an unasked question, the automatic tuner is very fast and
> extremely quiet. No memories, but it's so fast you really don't need
> memories.
>
> Congratulations on the purchase. It's by far the best rig I have ever had
> here, and I have had TOL line rigs from YaKenCom. Well worth the purchase
> price!
>
> 73  Pete Allen  AC5E
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>

<Prev in Thread] Current Thread [Next in Thread>