Thanks everyone for continued good suggestions. I called TT from work today.
Paul said to check to make sure diodes D9 and D10 are not shorted and then
check voltage on the connectors in the upper left. I will also check traces
underneath and generally for any loose connections. If that doesn't work he
says they would need the whole rig sent - not just the PBT board. Rats - they
are looking at my Corsair now - so I may be without a rig if I can't fix it. I
could go through withdrawal!! I'll check tonite when I get home and cross my
fingers.
73/Tim NZ7C
>
> From: VE1BN@aol.com
To: <tentec@contesting.com>
> Date: 2003/02/28 Fri AM 11:06:46 EST
> To: tentec@contesting.com
> Subject: Re: [TenTec] Tested: 1.8 filter definitely not engaging, ideas?
>
> Tim -
>
> Have you checked the underside of the board? Maybe
> there is a broken trace or bad soldered joint at the filter
> sockets. Had that problem in my brand new OMNI 6+.
>
> Worth taking a look see.
>
> 73 - Don, VE1BN@aol.com
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|