TenTec
[Top] [All Lists]

[TenTec] Omni VI filter macros, etc. for MixW v2.0x

To: <tentec@contesting.com>
Subject: [TenTec] Omni VI filter macros, etc. for MixW v2.0x
From: w5yr@att.net (George, W5YR)
Date: Wed Feb 19 18:03:22 2003
Well John, thank Heaven we learn something new every day. Carl N4PY also
mentioned that the Ten Tec's use the same command set as the IC-735.

One difference that might or might not be important in macro development is
that the IC-735 unlike all other Icoms uses a four-byte format instead of
five bytes in the exchange of some data with the computer. I know that this
applies to frequency data, but I do not know if it applies to other types as
well.

73/72, George
Amateur Radio W5YR -  the Yellow Rose of Texas
Fairview, TX 30 mi NE of Dallas in Collin county EM13QE
"In the 57th year and it just keeps getting better!"



-----Original Message-----
From: tentec-bounces@contesting.com
[mailto:tentec-bounces@contesting.com]On Behalf Of John Clifford
Sent: Wednesday, February 19, 2003 3:47 PM
To: tentec@contesting.com
Subject: RE: [TenTec] Omni VI filter macros, etc. for MixW v2.0x


> However,  the macros as stated in John's posting were written for the Icom
> IC-756PRO and PRO2  CI-V command sets.  I am very surprised that
> the Omni Vi
> and PROs share a common command language.

George had posted a similar macro for his 756 Pro, I just copied the idea
and made it work for the Omni VI.

For those of you who are running software that doesn't support the Ten-Tec
Omni VI (like MixW) choose 'Icom 735' and you will be okay.

The Ten-Tec Omni command set is a superset of that of the IC-735.  I don't
believe you can control xmit/rcv via software for the IC-735, for instance.
There are other commands (some mentioned in the Ten-Tec Omni VI manual, some
not... like how to select the narrow filter) available for the
intellectually curious.

 - jgc

John Clifford KD7KGX

Heathkit HW-9 WARC/HFT-9/HM-9
Elecraft K2 #1678 /KSB2/KIO2/KBT2/KAT2/KNB2/KAF2/KPA100
Ten-Tec Omni VI/Opt1

email: kd7kgx@arrl.net

<Prev in Thread] Current Thread [Next in Thread>