[TenTec] RX-10

[jhgraves@gis.net (jhgraves)]

Thanks to everyone for the suggestions regarding the hum.  I am now even
more puzzled.  I powered the RX-10 from my little switched 12V supply. 
The hum was the same.  It seems to peak at the same point or just after
the point where the signals are peaked. 

I have never had a direct conversion receiver before and so I am
learning as I go.  The bands are a bit off but track both my
transceivers on all bands.

Thanks agfain to all

John
WB1EHL