[TenTec] Re: pins 2 and 6

[jimr.reid@verizon.net (Jim Reid)]

> How are the pins numbered as you look at the back of the 
> rig? There is no diagram in the manual? Thanks, Tim

Tim,

There is a picture of the socket,  with the jumper properly
in place on page 2-1 of my CII manual.  The pin numbering
is weird!  Anyway,  the jumper goes between the middle
"hole"  of the top horizontal row at one end;  and the middle "hole"
on the left side vertical row.

Jim, KH7M