It sounds like your RCA cable acros the VFO in/out jumper is not pushed all
the way in. You may have to actually turn in around some as you push in to
help clean off any oxidation that may have occurred over the years. I have
had a similar problem with my Omni V on the TxEn and TxOut jacks. The
jumper tentec provided has very long pins and goes further into the jacks
than a standard cable connector.
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: <tlogan7@cox.net>
To: <tentec@contesting.com>
Sent: Tuesday, February 11, 2003 1:55 AM
Subject: [TenTec] confused re Corsair II VFO jumper
> Hi folks -
> This is probably going to be extremely embarassing but here goes. I have
not
> turned on my Corsair II since selling the external VFO (shouldn't have).
> Anyway - I put a RCA cable across the VFO in /out for a jumper - and I am
> getting 9.000 or 91.000 on the freq readout as if it's still looking for
the
> external VFO. The tuner dial will not function - as if it's waiting for
> control from the external VFO. Can somebody explain to me what I'm doing
> wrong? Thanks and try not to laugh too hysterically. 73/Tim
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|