OMNI VI plus has only two optional filters in 9MHz I.F. selectable from the
front panel. There is a standard filter which I believe is 2.4Mhz and is
cascaded with the optional filters. Not sure about the VI..
Dave W7DPW
Dave W7DPW
----- Original Message -----
From: "Ken Brown" <ken.d.brown@verizon.net>
To: <tentec@contesting.com>
Sent: Sunday, February 02, 2003 6:08 PM
Subject: [TenTec] Omni VI 9MHz IF
> Hi all,
>
> Thank you to those who have answered my previous question about the
> various versions and upgrades of the Omni VI. It is still not completely
> clear to me what is available for 9 MHz IF filters. My radio has two
> filters (not counting Y1 the 15 kHz 2 pole filter) the "standard" 2.4
> kHz filter and the "narrow" 0.5 kHz filter. And there is no space for a
> third (or second optional) filter. Since there has been lack of clarity
> in my question, and consequently a similar lack in the responses, I
> still do not know whether the most available spaces is two total, or two
> optional filters for a total of three (counting the standard 2.4 kHz
> filter), not counting the 15 kHz two pole filter. If a total of three is
> available on a more recent 9 MHz mixer/IF board, how does the selection
> and indication of which filter is in use work? Push the button three
> times to scroll through all three possibilities and back to the
> beginning? How do you know which one of the
narrowfilteroptionsisinuseotherthanbyhowitsounds,orrememberinghowmanytimesyo
upushedthebuttonatwocolorLEDperhapsKenN6KB__________________________________
_____________TenTecmailinglistTenTec@contesting.zl6httplists.contesting.com/
mailman/listinfo/tentec
|