TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[TenTec] WTB: 1.8 kHz filter, 9.0 MHz IF

from [k7gt@attbi.com] [Permanent Link][Original]
To: <tentec@contesting.com>
Subject: [TenTec] WTB: 1.8 kHz filter, 9.0 MHz IF
From: k7gt@attbi.com (k7gt@attbi.com)
Date: Sat, 07 Dec 2002 22:29:13 +0000 
Fellow Tentec fanatics.

An OmniVI I just bought didn't have quite the filter complement I had expected.
So I am looking for a narrow SSB filter for the main IF strip. 1.8 kHz, 9.0 MHz.
I would expect to pay about $65 shipped for such.

Thanks for listening.

GT

--
Allan  K7GT

Pleasanton CA
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] WTB: 1.8 kHz filter, 9.0 MHz IF, k7gt@attbi.com <=
Previous by Date:  [TenTec] Twenty meter User's Net Reminder, Michael A. Newell, WB4HUC
Next by Date:  [TenTec] F/S INRAD 2.8 kHz filter for TT bandpass IFs, k7gt@attbi.com
Previous by Thread:  [TenTec] Twenty meter User's Net Reminder, Michael A. Newell, WB4HUC
Next by Thread:  [TenTec] F/S INRAD 2.8 kHz filter for TT bandpass IFs, k7gt@attbi.com
Indexes:  [Date] [Thread] [Top] [All Lists]