Glad I waited to buy what turned out to be the Argobug V till after the real
reports started coming in. I knew the oooohs and ahhhh's would end sooner
or later.
de KØFL
----- Original Message -----
From: "jim danehy" <jdanehy@cinci.rr.com>
To: <Ten-Tec516@yahoogroups.com>
Sent: Friday, November 29, 2002 6:20 PM
Subject: Re: [Ten-Tec516] Losing Memories
ME TOO. I just thought I did not do things properly
W9VNE
Jim Danehy
Cincinnati, Ohio, USA
-84° 21' 29" W
39° 03' 33" N
----- Original Message -----
From: w4jz
To: Ten-Tec516@yahoogroups.com
Sent: Friday, November 29, 2002 4:03 PM
Subject: [Ten-Tec516] Losing Memories
This now has happened twice. Once Tuesday & today. When first
turning rig on I lose ALL memories. As if I never entered any.
Power supply, Astron RS-35A, turn on first then rig. It was turned on
this way Tuesday. I have a MFJ High Current DC outlet which has an
on/off switch. I, today, turn power supply on, then switch, then
rig. Lost memories again.
I did a master reset & will see what happens. Glad I don't have no
more than 9 memories.
Wonder if anybody else has seen this?
Reed W4JZ
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
Ten-Tec516-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
Ten-Tec516-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
|