If wiggling the Tx Out / Tx Enable seems to help, but it's not the jumper,
you might want to look at board where those jacks are mounted. Those jacks
are just mounted to the PC board and not anything solid. On the used Omni I
bought, both jacks had busted the solder loose.
Mark
----- Original Message -----
From: "Dave Kamp, KW0D" <kw0d@netexpress.net>
To: <TenTec@contesting.com>
Sent: Thursday, May 23, 2002 18:12 PM
Subject: Re: [TenTec] Omni Sick +
> Hi Robert-
>
> Check to see if the jumper between the TX Enable/TX RCA plugs is still
> good- I've had a lousy connection back there since day one (no jumper
> seems to make good contact), and a little wiggling brings it right back.
>
> DK :-)
>
> At 04:16 PM 05/23/2002 -0500, you wrote:
> >My omni 6+ is totally down as far as xmit goes.. No CW no SSB no Nothing!
> >Rcvr works fine! I just got it back from Tennessee a couple of months
ago,
> >and, now no XMIT.. Anybody have a thought on this one? Something I can
try???
> >
> >
> >
> >-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> >Robert McAdams
> >KA5PPX - General Class
> >Ten Tec Omni VI+ & Drake R8B
> >HyGain SuperThunderbird Yagi @70'
> >BC245XLT, DX-398 & highly mod-ed Pro-2006
> >-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> >
> >_______________________________________________
> >TenTec mailing list
> >TenTec@contesting.com
> >http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
> 73's from KW0D Dave in LeClaire, Iowa
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|